Connectors How-to Guides

Posi-lok connectors

Posi-tap connectors

 

Posi-lok connectors

Step 1 Strip wire

Ensure wire are stripped by 0.5" (13 mm)

Step 2

Insert wire into the red connector

Push the wire slightly to the side

Posi-tap connectors

Step 1 Insert hot wire in the gray slot

Insert the hot wire in the gray slot of the posi-tap connector

It is generally easier to connect the gray connector first.

Step 2 Hand tighten the connector

Hand tighten the connector the grey connector by hand

Step 3 Insert wire

Insert wire into the red connector

Push the wire slightly to the side

Step 4 Tighten the connector

Tighten the connector

Test the connection by slightly tugging on the wire